Latest Jobs at SGS

Job Description

• Responsibility to log received samples into the SLIMS using work orders from the client.
• Responsibility of analyzing all analytical samples using the correct procedures and/or methods.
• Responsibility to print sample labels.
• Responsibilities to ensure samples are sorted correctly before labeling and boxing the samples.
• Responsibility to report results within the time frame specified.
• Responsibility to follow all quality directives of this Department.
• Responsible for operation of laboratory instrumentation
• Responsibility to bring all problems (technical and managerial) to the attention of the Chemist.
• Responsibility to adhere to all quality, health and safety rules and regulations.
• Responsibility to ensure that the housekeeping in the receiving /working areas are in order.
• Complies and conforms to Laboratory Quality Management System (ISO17025).
• Must be able to help with the preparation of SANAS audits
• Responsibility to record any day-to-day repairs, maintenance, calibration and verification of instruments.
• All analytical data and calculations shall be made traceable and stored in the relevant files for that purpose or LIMS.
• Responsibility to work in other areas and/or Divisions if asked to do so.
• Adhere to all quality and safety requirements of the SGS management system
• Follow Supervisors clear detailed instructions and demonstrate flexibility in executing duties.
• Perform any other reasonable tasks as assigned by direct line manager.
• Shall adhere to all Health, Safety and Environmental requirements of the SGS OI Management System, country legislation, Rules for Life, local legal requirements and laws.
• Shall comply and conform to the QHSE, Global and country policies of SGS.
• Participate and form part of Operational Integrity projects and campaigns.
• Shall report Health, Safety and Environmental hazards, incidents/accidents and near misses to the Supervisor/SHE Representative/Location Manager/OI Site Coordinator.
• Apply Check status process and use the Stop Work Authority whenever the control of risks is not clearly established and understood.
• Observe and report any faulty/nonfunctioning apparatus or equipment and or deviations from process/protocols/procedures/work instructions, to the Supervisor/Location Manager.
• Assist in investigations.
• Ensure that all proper procedures/Working instructions, etc. are followed.
• Assist with training of employee/s where required.
• Perform and ensure good housekeeping practices are maintained in all work areas at all times.
• Participate and adhere to all HSE Procedures/Working instructions, Integrity, Safe Talks, Toolbox talks, etc. training.
• Assist in the monthly stock counts within the department

Qualifications

• BSc, BTech or National Diploma in Analytical Chemistry or proven years of laboratory, knowledge, skills and experience sufficient to be recognized as a qualification through – Recognition of Prior Learning.
• Grade 12 / Matric with Mathematics and Science as subjects.

go to method of application »

Job Description

PRIMARY RESPONSIBILITIES

• Perform analysis of assigned samples in the most accurate, productive and timely way as per the relevant Test Method instruction.

SPECIFIC RESPONSIBILITIES

• Performing the sample preparation tasks (weighing, drying, crushing, milling, screening, screen checks, filter press and carbon assays) exactly as per relevant Competence Modules set.
• Liaising with the Supervisor to ensure customer requirements are achieved with regard to the turnaround time commitments and Quality of results.
• Reporting daily production figures and giving detailed explanations for targets not met.
• Assisting in the investigation of any non-conforming work, Client queries and Improvement Requests that would have been raised relating to the sample prep process.
• Reporting any apparatus or equipment which is malfunctioning.
• Liaising with the Supervisor in creating worksheets and prioritizing jobs.
• Assisting with section’s workflow planning.
• Assisting in ensuring that required stock levels for sample pre are maintained.
• Use SLIM system for data transfer and capturing as required.
• Assisting in preparing for Audits and addressing of non-conformances.
• Recording and filing of all equipment records and analysis worksheets for Quality Purposes and future reference.
• Ensuring the most appropriate QC samples are inserted in line with the Global Quality policy.
• Performing duties on all relevant workstations as required by the section’s workload.
• Assisting with control and time keeping administration.
• Ensuring compliance to the Quality Management System (ISO17025 and SANAS requirements).
• Ensuring compliance to the HSE policy of the company.
• Performing any other reasonable tasks as assigned by direct line manager / supervisor.

COMPLIANCE & AUTHORITY

• Cease the use of any equipment that may be deemed to constitute a safety hazard or enter hazardous environments without the necessary knowledge and protection and report the situation to higher authority to take action.
• Cease to carry on with work that may affect the quality (integrity) of services and report the situation to higher authority to take action.
• Initiate a formal improvement request when a deviation of the system occurs, possible improvements are identified or when nonconformity is identified.
• Any person has the right to refuse to perform work that may damage the environment in an imminent and serious way and to report such a situation.

Qualifications

Education

• Minimum Grade 12 / Matric with Mathematics and Science as subjects.
• National Diploma in Analytical Chemistry will be an added advantage.

Experience

• Minimum of 2 Years in sample prep experience
• Computer literate in Microsoft Word and Excel.
• Knowledge of Laboratory Quality Management System

REQUIRED SKILLS

• Self-motivator
• Must have an appreciable attention to detail.
• Ability to strictly follow and understand instructions.
• Competent technical knowledge of sample preparation processes
• Must have full understanding of the LIMS system.
• Able to work with technical and management staff.
• Ability to work well in a team situation towards achieving common departmental goals.
• Able to coordinate sample prep activities.
• Able to work independently and to coordinate several activities simultaneously.
• Good communication and interpersonal skills
• Must be able to communicate in English.
• Must be willing to work overtime/flexible hours when necessary.

go to method of application »

Job Description

PRIMARY RESPONSIBILITIES

• Perform analysis of assigned samples in the most accurate, productive and timely way as per the relevant Test Method instruction.

SPECIFIC RESPONSIBILITIES

• Performing the routine Fire Assay tasks (weighing, fluxing, fusion, cupelling and dissolution of prills) exactly as per relevant Competence Modules set.
• Liaising with the Supervisor to ensure customer requirements are achieved with regard to the turnaround time commitments and Quality of results.
• Reporting daily production figures and giving detailed explanations for targets not met.
• Assisting in the investigation of any non-conforming work, Client queries and Improvement Requests that would have been raised relating to the Fire Assay process.
• Reporting any apparatus or equipment which is malfunctioning.
• Liaising with the Supervisor in creating worksheets and prioritizing jobs.
• Assisting with section’s workflow planning.
• Assisting in ensuring that required stock levels for Fire Assay are maintained.
• Use SLIM system for data transfer and capturing as required
• Assisting in preparing for Audits and addressing of non-conformances.
• Recording and filing of all equipment records and analysis worksheets for Quality Purposes and future reference.
• Ensuring the most appropriate QC samples are inserted in line with the Global Quality policy.
• Performing duties on all relevant workstations as required by the section’s workload.
• Assisting with control and time keeping administration.
• Ensuring compliance to the Quality Management System (ISO17025 and SANAS requirements).
• Ensuring compliance to the HSE policy of the company.
• Performing any other reasonable tasks as assigned by direct line manager / supervisor.

COMPLIANCE & AUTHORITY

• Cease the use of any equipment that may be deemed to constitute a safety hazard or enter hazardous environments without the necessary knowledge and protection and report the situation to higher authority to take action.
• Cease to carry on with work that may affect the quality (integrity) of services and report the situation to higher authority to take action.
• Initiate a formal improvement request when a deviation of the system occurs, possible improvements are identified or when nonconformity is identified.
• Any person has the right to refuse to perform work that may damage the environment in an imminent and serious way and to report such a situation.

Qualifications

Education

• Minimum Grade 12 / Matric with Mathematics and Science as subjects.
• National Diploma in Analytical Chemistry will be an added advantage.

Experience

• Minimum of 2 Years in Fire Assay experience
• Computer literate in Microsoft Word and Excel.
• Knowledge of Laboratory Quality Management System

REQUIRED SKILLS

• Self-motivator
• Must have an appreciable attention to detail.
• Ability to strictly follow and understand instructions.
• Competent technical knowledge of Fire Assay analytical processes
• Must have full understanding of the LIMS system.
• Able to work with technical and management staff.
• Ability to work well in a team situation towards achieving common departmental goals.
• Able to coordinate fire assay activities.
• Able to work independently and to coordinate several activities simultaneously.
• Good communication and interpersonal skills
• Must be able to communicate in English.
• Must be willing to work overtime/flexible hours when necessary.