Latest Jobs at Gold One Group Limited

Job specification:

• Grade 10, 11 or Matric certificate, N2 or equivalent qualification
• Trade test in Diesel Mechanic/ Earth Moving Mechanic, Diesel Fitter, Hydraulic Fitter, Millwright or Fitter preferably section 13 from a recognised institution
• Minimum 5 years proven post qualification experience within a trackless mobile machinery
• In depth practical knowledge with original equipment manufacturer qualifications of Sandvik, Caterpillar, Fermel, Manitou, Back/Front Loader, Dozers and Atlas Copco mobile machinery are essential and not negotiable
• Sound knowledge of hydraulic fault-finding hydraulic systems, hydraulic cylinders, drifters, bolters, torque convertors, transmissions, and final drives
• Sound knowledge of Caterpillar, Mercedes Benz Deutz, Cummins, Detroit, Perkins and Toyota engines inclusive of engine protection systems
• Good knowledge of electro/hydraulic operated components and fault-finding making use of computerized diagnostic systems
• Independent judgment, initiative and interpersonal communication and technical skills are essential and required
• Sound knowledge of computerized maintenance management systems associated with this position Afrigle, Saps or JD Edwards
• Demonstrate in depth knowledge of TMM Equipment Mechanical policies, procedures and practices
• Ability to work flexible hours and perform standby duties
• Proficient in English and any other of 11 official languages
• South African Driver’s License (Code 8-10) is essential
• South African Citizenship
• Clear Criminal Record

Responsibilities:

• Work a rotation and circle of shifts
• Timeous and effective maintenance and repairs to all TMM Equipment and accessories
• Ability to make rough sketches, pre-planning and estimate the cost and report back to supervisor(s)
• Troubleshooting and detailed fault analysis
• Ensure spares availability to minimize standing time and optimize availability of TMM Equipment to ensure sustained production
• Perform preventive maintenance and ensure that all TMM Equipment/ Machinery fire suppression, alarms and electrical emergency systems are always operational
• Manage and maintain in area of responsibility in accordance with prescribed standards and practices
• Adhere to MHSA standards & Gold1’s safety motto : “Nothing is so important that  it cannot be done safely”
   

go to method of application »

Job Description
Job specification:

• Grade 10, 11 or 12 or equivalent NQF 4 qualifications
• Proficient in English and any other of the 11 official languages
• Section 13 / 26 Electrical Trade test from a recognised institution is required
• Knowledge of Sandvik, Back/Front Loader Cat and CAT Machinery will be advantageous, Manitou, Fermel Machinery, Dozers Cat, Sandvik Drill Rigs and Bolters machinery will be advantage
• Independent judgment, initiative and interpersonal communication skills are required
• 3 years’ experience in TMM Electrical environment as a TMM Electrician
• Demonstrate in depth knowledge of TMM Electrical procedures, policies, and practices.
• Must be a legal South African citizen
• Clear Criminal Record

Responsibilities:

• Work a cycle of shifts
• Fault finding and diagnostic ability
• Maintenance and repairs to all Trackless Mining Machinery.
• Ability to make rough sketches, pre-planning and estimate cost and report back to supervisor
• Assemble, install, maintain, and repair electrical apparatus
• Troubleshooting and detailed fault analysis
• Manage and maintain in area of responsibility in accordance with prescribed standards and practices.
• Perform preventive maintenance on switch gears and transformers and ensure that all machinery fire suppression, alarms, and electrical emergency systems are operational at all times.
• Adhere to MHSA standards & Gold1’s safety motto

go to method of application »

• All applications must include police-certified copies of the applicant's ID and certificates

 Qualifying Criteria:

• Grade 10, 11 or Matric certificate
• Additional certification in logistics or operations management is advantageous.
• Previous experience as a Weighbridge Operator or in a similar role (preferred but not essential).
• Strong numerical, record-keeping, and data entry skills.
• Basic computer literacy (experience with weighbridge software is a plus).
• Excellent attention to detail and accuracy in recording weights and information.
• Good communication and interpersonal skills.
• Ability to work independently and handle tasks efficiently.
• Knowledge of health, safety, and environmental regulations related to weighing operations.
• Flexibility is required and essential (able to work cycle of shifts)
• South African Citizenship
• Clear Criminal Record

Responsibilities:

• Follow up on daily truck orders and audit daily inspection.
• Weighing trucks from entry and exit and ensuring efficient data entry.
• Periodically inspecting the weighing devices to ensure workflow.
• Preparing a report in which the weight and number of trucks loaded for each shift are recorded.

go to method of application »

Qualifying Criteria:

• Grade 10, 11 or 12 / National Senior Certificate or equivalent.
• Relevant plant/process operation training or qualification will be advantageous.
• Previous experience within a metallurgical, mineral processing, processing plant or mining environment will be advantageous.
• Basic understanding of plant equipment and operating procedures will be advantageous.
• Ability to communicate effectively in a working environment.
• Ability to understand and follow instructions and standard operating procedures.
• Physically capable of performing duties within an industrial plant environment.
• Must possess good verbal communication skills
• South African Citizenship
• Clear Criminal Record

 Responsibilities:

• Assisting Plant Operators with the operation and monitoring of metallurgical plant equipment.
• Conducting routine inspections of plant equipment and reporting defects, leaks, unusual noises, vibrations or other abnormalities.
• Assisting with plant start-up and shutdown activities under the instruction of the Plant Operator or Supervisor.
• Monitoring pumps, pipelines, valves, conveyors, screens, tanks, sumps and other relevant plant equipment.
• Assisting with opening and closing valves and controlling material or slurry flow as instructed.
• Checking and monitoring tank and sump levels and reporting abnormal conditions.
• Assisting with clearing minor spillages and blockages where safe and authorised to do so.
• Supporting operators during plant breakdowns and maintenance activities.
• Communicating equipment and process abnormalities promptly to the Plant Operator or Supervisor.
• Assisting with sampling activities where required.
• Performing basic operational checks in accordance with standard operating procedures.
• Ensuring that walkways, work areas and access points remain clean and free from unnecessary obstructions.
• Maintaining high housekeeping standards throughout the plant.
• Assisting with the safe handling and storage of operational materials and equipment.
• Participating in pre-shift meetings, toolbox talks and safety discussions.
• Identifying and reporting hazards, unsafe acts and unsafe conditions.
• Correctly using and maintaining prescribed Personal Protective Equipment (PPE).
• Complying with all lawful instructions, operational procedures and company standards.
• Performing any other reasonable plant-related duties as instructed by the Supervisor.
• Manage and maintain in area of responsibility in accordance with mine standards, procedures and practices
• Adhere to MHSA standards & Gold1’s safety motto : “Nothing is so important that it cannot be done safely”
   

go to method of application »

Job specification:

• Grade 10, 11 or 12 / NQF Level 4 or equivalent qualification
• 2-3 years’ previous operating experience in a mineral processing environment, preferably gold
• Knowledge of SCADA and AMI administration will be advantageous
• Relevant mineral processing or metallurgical plant qualification/certificate
• Previous operational experience within a metallurgical or mineral processing plant is required.
• Experience within scrubber, milling and/or CIL operations will be advantageous.
• Sound understanding of plant operating procedures and process equipment.
• Basic understanding of process monitoring and control principles.
• Ability to read and record process measurements accurately.
• Basic computer literacy will be advantageous.
• You must be medically fit to work in a mining and metallurgical plant environment.
• The candidate must be willing and able to work shifts, weekends, public holidays, and overtime according to operational requirements.
• Independent judgement, initiative and interpersonal communication skills are required
• Proficient in English and any other of the 11 official languages
• Ability to diagnose problems and troubleshoot thereof
• Capable of completing repetitive tasks at a consistent standard
• Demonstrate in-depth knowledge of processing technologies and equipment
• South African Citizenship
• Clear Criminal Record

 Responsibilities:

• Operating and monitoring metallurgical plant equipment within the assigned section.
• Conducting pre-start inspections and ensuring equipment is safe and ready for operation.
• Starting, operating, and shutting down plant equipment in accordance with approved Standard Operating Procedures (SOPs) is also part of the role.
• Monitoring process parameters, equipment performance and material flow to maintain stable plant operations.
• Conducting regular plant inspections and identifying abnormalities such as leaks, spillages, blockages, excessive vibration, abnormal noise, and equipment deterioration.
• Taking appropriate first-line action within the scope of authority when operational deviations occur.
• Immediately reporting equipment defects, process deviations and unsafe conditions to the supervisor or relevant maintenance personnel.
• Monitoring and controlling feed rates, flow rates, densities, levels and other relevant process parameters where applicable.
• Assisting with optimisation of plant performance, throughput and recovery.
• Conducting routine sampling and basic process checks where required.
• Recording operating readings and completing production logs, checklists and shift reports accurately.
• Communicating plant status, abnormalities and outstanding activities during shift handovers.
• Assisting with plant start-ups following maintenance activities or shutdowns.
• Supporting maintenance personnel during breakdowns and planned maintenance is also part of the role.
• Ensuring plant areas, equipment, platforms and walkways are maintained to acceptable housekeeping standards.
• Performing other operational duties as reasonably instructed by the supervisor.
• Practice and adhere to metallurgical plant policies and procedures
• Adhere to MHSA standards & Gold1 Group’s safety motto: “Nothing is so important that it cannot be done safely”
   

go to method of application »

 Job specification:

• Grade 10, 11, 12 or equivalent NQF qualifications
• A minimum of 2–3 years' relevant experience within a metallurgical/mineral processing plant environment is preferred.
• Previous control room operating experience will be advantageous.
• Experience in monitoring and controlling multiple plant processes simultaneously will be advantageous.
• Relevant Mineral Processing / Metallurgical Plant Operations qualification will be advantageous.
• Relevant Control Room Operator or Process Plant Operator certification/training and experience will be advantageous.
• Previous experience within a metallurgical, mineral processing or mining plant environment.
• Previous experience operating and monitoring plant processes through SCADA and/or DCS systems.
• Sound understanding of metallurgical plant processes and equipment.
• Must work shifts and overtime when required, including weekends and public holidays, as per the operational roster.
• Proficiency in English and any one of the 11 official languages
• Must have computer literacy.
• Must have excellent communication skills with radio and telephone.
• South African Driver’s License (Code 8-10) essential
• South African Citizenship
• Clear Criminal Record

Responsibilities

• Monitoring and controlling metallurgical plant processes through the SCADA/DCS control system.
• Monitoring critical operating parameters, including flow rates, pressures, temperatures, tank levels, densities and other relevant process variables.
• Starting, stopping and adjusting plant equipment and processes in accordance with approved operating procedures.
• Maintaining plant operations within prescribed operating parameters and production requirements.
• Identifying process deviations, equipment abnormalities, alarms and potential operational risks.
• Responding promptly and appropriately to plant alarms, trips and emergency situations.
• Communicating plant conditions, equipment problems and process deviations to plant supervisors, field operators and maintenance personnel.
• Coordinating with field operators to verify equipment status and implement operational adjustments.
• Monitoring the operational status of pumps, conveyors, crushers, mills, screens, cyclones, thickeners and other applicable processing equipment.
• Assisting with the optimisation of plant throughput, recovery, availability and efficiency.
• Recording plant operating parameters, production information, equipment downtime and process interruptions accurately.
• Completing control room logbooks, shift reports and other required operational documentation.
• Conducting effective shift handovers and communicating outstanding operational issues to the incoming shift.
• Assisting with plant start-up and shutdown procedures.
• Immediately reporting unsafe conditions, equipment failures and significant process deviations.
• Liaising with maintenance teams regarding equipment breakdowns and planned maintenance activities.
• Ensuring compliance with operational procedures, standards and instructions.
• Maintaining good housekeeping and acceptable standards within the control room.
• Participating in safety meetings, toolbox talks, risk assessments and operational improvement initiatives.
• Performing any other reasonable duties associated with the position.
• Adhere to MHSA standards & Gold1’s safety motto: “Nothing is so important that it cannot be done safely.”

go to method of application »

Qualifying Criteria:

• Grade 10, 11, 12 or equivalent qualifications
• Trade Test Certificate: Instrument Mechanician (Red Seal).
• Electrical or instrumentation engineering studies would be an advantage.
• Minimum of 3 to 5 years' experience in a metallurgical plant or heavy industrial environment.
• Experience with SCADA/HMI systems.
• Rockwell (Allen-Bradley) PLC Programming.
• Knowledge of Networking
• Sound knowledge of instrumentation standards and safety practices.
• Ability to troubleshoot and repair control systems and instrumentation faults.
• Proficient in the use of calibration tools and test instruments.
• Computer literacy and experience with maintenance management systems (e.g., SAP, Pragma).
• Standby and callout duties and ability to work with minimum supervision
• Valid driver’s licence
• South African Citizenship
• Clear Criminal Record

 Responsibilities:

• Perform maintenance, fault-finding, and calibration on a wide range of field instruments (pressure, flow, temperature, level transmitters, etc.).
• Ensure accurate functioning of PLCs, SCADA systems, and other control systems.
• Conduct routine inspections and preventative maintenance on instrumentation equipment.
• Interpret technical diagrams, loop drawings, and P&IDs.
• Maintain documentation and records of all instrumentation work.
• Ensure compliance with health, safety, and environmental regulations.
• Provide technical support during plant shutdowns, projects, and commissioning.
• Conduct all work according to required standards and specifications
• Adhere to MHSA standards & Gold1 Group’s safety motto: “Nothing is so important that it cannot be done safely”
   

go to method of application »

Job specification:

• Trade Test preferably Section 13 or Section 26(D).
• Must be in possession of an N2 certificate.
• Proficiency in English and any other of the 11 official languages
• Ability to work flexible hours and perform standby duties.
• 2-3 years post qualification experience, having worked in a Gold Plant will be advantageous.
• Independent judgment, initiative, and outstanding technical and communication skills are required and essential.
• Excellent knowledge of surface electrical installations, distribution, and standards.
• Depth knowledge of electrical voltages and lock-out procedure
• South African Driver’s license (Code 8-10) essential
• South African Citizenship
• Clear Criminal Record

Responsibilities:

• Functional support, quality control, and best practices within the Gold Plant section
• Specialized knowledge to analyse and solve complex problems.
• Perform effective routine maintenance in electrical, planning, and project organization.
• Troubleshooting and detailed fault analysis
• Ability to make rough sketches, pre-planning, estimate cost, and report to supervisor.
• Preventative and scheduled maintenance on switch gears, transformers, and electrical cables
• Manage and maintain in area of responsibility in accordance with prescribed standard procedures, specifications, and practices.
• Adhere to MHSA standards & Gold1’s safety motto: “Nothing is so important that it cannot be done safely”.
   

go to method of application »

Job specification: 

• Grade 12 or equivalent NQF4 qualifications
• N2 Trade Theory
• Trade test from a recognized institution, preferably Section 13.
• Must be computer literate with emphasis on Excel.
• Independent judgement, initiative and interpersonal communication skills are required and essential.
• Knowledge and proven understanding of plant production and plant operations required.
• Ability to work flexible hours and perform standby duties.
• 5 - 7 years’ post qualification experience in metallurgical gold plant, trackless mining or industrialized environment.
• Demonstrate in-depth knowledge of metallurgical gold plant workshop standard procedures, functions, and systems including but not limited to plant maintenance, crushers, pumps, motors and any other mechanical equipment within the gold plant.
• Demonstrate integrity and above average interpersonal skills and abilities.
• South African Driver’s license (Code 08-10) essential
• South African Citizenship.
• Clear Criminal Record.

Responsibilities: 

• Work a cycle of shifts.
• Functional support, quality control and best practices within metallurgical plant
• Implement and improve effective preventative maintenance programs / or systems in order to optimise production of the gold plant.
• Investigate, troubleshoot, diagnose and efficiently perform trade related maintenance and repairs on all plant mechanical equipment, belts, and other structural components.
• Establish and maintain a good working relationship with personnel to ensure productivity of personnel.
• Specialized knowledge to analyse and solve complex problems.
• Assign corrective measures and follow-up on outstanding / overdue actions.
• Manage and maintain in area of responsibility in accordance with prescribed standards and practices.
• Practice and adhere to metallurgical plant policies and procedures.
• Adhere to MHSA standards & Gold1 Group’s safety motto : “Nothing is so important that it cannot be done safely”
   

go to method of application »

Qualifying Criteria:

• Grade 10, 11, 12, or equivalent qualification
• Proficient in English and any other of the 11 official languages
• Basic mechanical knowledge and understanding will be advantageous.
• Previous experience as a Fitter Aide, Engineering Assistant or Mechanical Assistant within a metallurgical plant, processing plant or mining environment will be advantageous.
• Basic knowledge of hand tools and mechanical equipment.
• Ability to follow instructions and work under the supervision of a qualified Artisan.
• Physically fit and able to perform manual work in a plant environment.
• Ability and willingness to work shifts, overtime, standby and during plant shutdowns when required.
• Medically fit to work in a mining and metallurgical plant environment.
• Clear Criminal Record
• South African Citizenship

 Responsibilities: 

• Assisting qualified Fitters with planned and breakdown maintenance activities.
• Assisting with the inspection, repair, installation and replacement of mechanical equipment and components.
• Supporting maintenance activities on pumps, gearboxes, conveyors, screens, crushers, valves, pipelines and other plant equipment.
• Assisting with the removal and installation of bearings, couplings, belts, pulleys and related mechanical components.
• Cleaning, preparing and organising equipment, components and work areas before and after maintenance activities.
• Assisting with basic lubrication and preventative maintenance activities as instructed.
• Carrying, handling and positioning tools, equipment and mechanical components safely.
• Identifying and reporting visible equipment defects, leaks, abnormal noises and unsafe conditions.
• Ensuring that tools and equipment are correctly used, cleaned and returned after completion of work.
• Assisting during plant shutdowns and scheduled maintenance activities.
• Maintaining good housekeeping standards within workshops and plant work areas.
• Complying with Lock-Out/Tag-Out and isolation procedures before maintenance work commences.
• Adhering to all company safety standards, procedures and instructions.
• Wearing and maintaining the required Personal Protective Equipment (PPE).
• Participating in safety meetings, toolbox talks, risk assessments and pre-task inspections.
• Performing other reasonable duties related to the position as instructed by the Fitter or Supervisor.
• Always take instructions from the supervisor(s) responsible for the shift
• Adhere to company policies and procedures
• Adhere to MHSA standards & Gold1 Group’s safety motto: “Nothing is so important that it cannot be done safely.”
   

go to method of application »

Qualifying Criteria:

• Grade 10, 11, 12, or equivalent qualification
• Proficient in English and any other of the 11 official languages
• Previous experience as a Boilermaker Aide, Engineering Assistant or Artisan Aide will be advantageous.
• Previous experience within a metallurgical plant, mineral processing plant or mining environment will be advantageous.
• Basic knowledge of boilermaking, fabrication and mechanical maintenance activities.
• Basic knowledge and understanding of hand and power tools.
• Ability to follow instructions and work effectively under the supervision of a qualified Artisan.
• Physically fit and capable of performing manual work.
• Must be medically fit to work in a mining and metallurgical plant environment.
• Willing and able to work shifts, overtime, standby and during planned plant shutdowns when required.Medically fit to work in a mining and metallurgical plant environment.
• Clear Criminal Record
• South African Citizenship

 Responsibilities: 

• Assisting qualified Boilermakers with fabrication, maintenance, installation and repair activities.
• Assisting with the fabrication and repair of chutes, launders, hoppers, tanks, bins, guards, platforms and structural steelwork.
• Assisting with cutting, grinding, drilling, measuring, marking and preparation of materials.
• Preparing steel and other materials for welding and fabrication activities.
• Assisting with the removal and installation of damaged or worn plant components.
• Holding, positioning and securing materials and components during fabrication and installation.
• Assisting with basic welding and cutting activities where authorised and competent to do so.
• Assisting with the erection and dismantling of steel structures and plant components.
• Supporting Boilermakers during plant breakdowns, planned maintenance and shutdown activities.
• Cleaning and preparing work areas before and after maintenance activities.
• Ensuring tools, equipment and materials are correctly handled, cleaned and stored.
• Reporting damaged tools, equipment defects and unsafe conditions to the responsible Artisan or Supervisor.
• Maintaining high housekeeping standards within workshops and plant areas.
• Carrying out lawful and reasonable instructions provided by the Boilermaker or Supervisor.Always take instructions from the supervisor(s) responsible for the shift
• Adhere to company policies and procedures
• Adhere to MHSA standards & Gold1 Group’s safety motto: “Nothing is so important that it cannot be done safely.”

go to method of application »

 Qualifying Criteria:

•  Grade 12 or equivalent NQF 4 qualification.
• Trade Test : Boilermaker (preferably Section 13).
• Minimum of 5-7 years’ experience in metallurgical gold plant experience; trackless mining or industrialized environment.
• Expert knowledge of gold plant engineering functions including but not limited to plant maintenance, conveyor belts, crushers, pumps, pipe developing, fitting and any other equipment within the gold plant
• Proficient in English and any other of the 11 official languages.
• Must be computer literate with emphasis on Excel and Word.
• Independent judgement, initiative and interpersonal communication skills are required.
• Sound knowledge of fabrication skills and ability to interpret engineering fabrication, construction drawings and erections.
• Must have their own transport.
• Must be a legal South African citizen.
• Clear Criminal Record.

 Responsibilities:

•  Work a rotation of shifts
• Quality control, best practices and functional support within a Gold Plant, Engineering or Boilermaking section
• Specialized knowledge to analyse and solve complex problems
• Inspect, disassemble, re-assemble, construct and repair all components of boilermaker systems and associated mechanical equipment
• Responsible for pipe developing and fitting thereof
• Troubleshooting and detailed fault analysis
• Compile and distribute reports
• Manage and maintain in area of responsibility in accordance with prescribed standards and practices
• Practice and adhere to metallurgical plant policies and procedures
• Adhere to MHSA standards and Gold One safety motto “Nothing is so important that it cannot be done safely”