Latest Jobs at Phakisa Group

Duties and Responsibilities:

• Prepare and manage quotations for branches and representatives
• Source and follow up on material pricing from suppliers
• Review and approve quotations for accuracy
• Handle supplier questionnaires, customer PIFs, and spec sheets
• Respond to email queries and rep specification requests
• Assist with updated pricing for Stock Control
• Maintain accurate records and general filing
• Compile month-end reports (quotes, analysis, questionnaires, spec sheets)
• Conduct price comparisons and basic analysis

Requirements:

• Grade 12
• Must be able to communicate in Afrikaans and English 
• Strong attention to detail and organization
• Good communication and email management skills
• Fully computer literate (Excel, Word, Outlook and Pastel)
• Ability to manage multiple tasks and deadlines
   

go to method of application »

Job Purpose

• To inspect, repair, and straighten damaged trailer chassis and structural components using specialised equipment and repair techniques, ensuring all work meets manufacturer specifications, quality standards, and safety requirements.

Key Responsibilities

• Assess damaged trailer chassis and identify structural defects.
• Measure chassis alignment using approved measuring equipment.
• Straighten and repair trailer chassis using hydraulic pulling equipment, jigs, and other specialised tools.
• Repair or replace damaged structural components where required.
• Perform welding, cutting, and fabrication work as necessary.
• Ensure all chassis repairs comply with manufacturer specifications and industry standards.
• Conduct final inspections to verify structural integrity and alignment.
• Maintain workshop equipment and ensure it is used correctly.
• Keep accurate records of repairs completed.
• Maintain a clean, organised, and safe work environment.
• Adhere to company policies and Occupational Health and Safety (OHS) regulations.
• Collaborate with panel beaters, welders, spray painters, and workshop personnel to ensure efficient workflow.

Minimum Requirements

• Grade 12 (Matric) or equivalent.
• Minimum 3–5 years' experience in trailer chassis straightening or heavy vehicle structural repairs.
• Experience working on commercial trailers, trucks, or heavy-duty vehicles.
• Competent in hydraulic straightening equipment and chassis alignment systems.
• Welding experience (MIG/CO₂) is essential.
• Valid driver's licence (Code 10 or Code 14 advantageous).
• Ability to work overtime when required.

Knowledge and Skills

• Strong understanding of trailer chassis construction and structural components.
• Ability to interpret technical drawings and repair specifications.
• Knowledge of chassis measuring and alignment procedures.
• Proficient in welding, grinding, cutting, and fabrication techniques.
• Ability to use workshop measuring equipment accurately.
• Strong attention to detail and quality workmanship.
• Good problem-solving and fault-finding skills.
• Ability to work independently and within a team.

Competencies

• Excellent mechanical aptitude.
• High level of accuracy.
• Strong work ethic.
• Time management skills.
• Ability to work under pressure and meet deadlines.
• Good communication skills.
• Safety-conscious and responsible.
• Reliable and dependable.

Physical Requirements

• Physically fit and capable of handling heavy-duty equipment and components.
• Ability to stand, bend, lift, and work in demanding workshop conditions.
• Comfortable working around hydraulic equipment, welding operations, and heavy machinery.

Health & Safety Responsibilities

• Wear prescribed Personal Protective Equipment (PPE) at all times.
• Comply with Occupational Health and Safety (OHS) regulations and company safety procedures.
• Operate hydraulic equipment, welding machines, and workshop tools safely.
• Report unsafe conditions, defective equipment, and workplace incidents immediately.
• Maintain good housekeeping standards within the workshop.

Key Performance Indicators (KPIs)

• Accuracy of chassis alignment and structural repairs.
• Quality of completed repairs.
• Productivity and turnaround times.
• Compliance with manufacturer repair standards.
• Adherence to health and safety procedures.
• Care and maintenance of workshop equipment.
• Attendance, punctuality, and reliability.
• Teamwork and contribution to workshop efficiency.

go to method of application »

• A workshop in JHB - Brakpan is seeking a Semi-Skilled Technician to join their team on a contractor basis. Mid-career level with 2-4 years of experience in the Automotive and Engineering industry.

Key Responsibilities:

• Assist with the repair of damaged vehicle body panels.
• Remove and refit vehicle components such as bumpers, lights, mirrors, trims, and door handles.
• Perform basic panel beating tasks under supervision.
• Prepare vehicle surfaces for painting, including sanding, masking, filling, and priming.
• Operate workshop tools and equipment safely.
• Assist with vehicle stripping and assembly.
• Ensure repairs are completed according to workshop quality standards.
• Keep work areas clean, organised, and safe.
• Report damaged tools or equipment to the supervisor.
• Follow company procedures and health and safety regulations.
• Assist with loading and moving vehicles within the workshop when required.

Minimum Requirements:

• Matric (preferred).
• 1-3 years' previous experience in a panel beating or automotive workshop.
• Basic knowledge of vehicle body repairs.
• Familiarity with workshop hand tools and power tools.
• Valid driver's licence (advantageous).
• Ability to work overtime when required.

Skills and Competencies:

• Good attention to detail.
• Mechanical aptitude.
• Ability to follow instructions.
• Good communication skills.
• Team player.
• Time management skills.
• Ability to work under pressure.
• Problem-solving skills.
• Strong work ethic and reliability.

Physical Requirements:

• Physically fit and able to lift heavy vehicle components.
• Comfortable standing for extended periods.
• Able to work in a workshop environment with noise, dust, and paint fumes.
• Good hand-eye coordination.

Health & Safety:

• Wear the required Personal Protective Equipment (PPE) at all times.
• Comply with Occupational Health and Safety (OHS) regulations.
• Report unsafe conditions immediately.
• Handle tools and equipment responsibly.

Performance Indicators (KPIs):

• Quality of workmanship.
• Productivity and turnaround time.
• Compliance with safety procedures.
• Attendance and punctuality.
• Care of tools and equipment.
• Teamwork and cooperation.
• Customer satisfaction through quality repairs.

go to method of application »

Job Summary:

• We are seeking a motivated Semiskilled Welder to join our team. The Semiskilled Welder is responsible for carrying out welding, and metal repair work on damages vehicle body components and supporting fabrication activities within the panel beating industry. The incumbent works under the supervision of qualified artisan or senior panel beater to ensure repairs meet quality safety and manufacturer standards

Duties and Responsibilities:

• Perform basic to intermediate welding repairs on vehicle body panels, chassis components, brackets, and metal assemblies.
• Assist with the repair and replacement of damaged vehicle body panels and structural components.
• Prepare materials by cutting, grinding, cleaning, and fitting components prior to welding.
• Carry out MIG, spot welding, and other approved welding processes in accordance with workshop procedures.
• Assist with the fabrication of replacement metal parts where required.
• Ensure welds meet quality standards and are free from defects.
• Grind, smooth, and finish welded areas in preparation for panel beating and painting.
• Inspect repaired areas for strength, alignment, and finish.
• Operate welding equipment and workshop tools safely and efficiently.
• Report faulty equipment or unsafe working conditions to the supervisor.
• Maintain welding equipment and ensure routine care of tools.
• Keep the work area clean and organised in line with 5S and housekeeping standards.
• Comply with Occupational Health and Safety (OHS) requirements and wear the required personal protective equipment (PPE).
• Support workshop productivity by completing work within agreed turnaround times.

Requirements:

• Grade 12
• Clean criminal record
• 2 - 3 Years experience as semiskilled Welder within the Panel beating industry
• Good communication Skills
• Available immediately
• Rate: R70 - R85 Per Hour

go to method of application »

• The Semi-skilled Boilermaker assist with the repair, fabrication and restoration of vehicle body components and metal structure. Working under the guidance of qualified artisans, the incumbent preparation, cutting, welding , fitting and panel repairs to ensure vehicles are restored to manufacture and company quality standards

Duties and Responsibilities:

• Assist qualified boilermakers and panel beaters with vehicle body repairs.
• Remove, repair, reshape, and replace damaged metal panels and body components.
• Cut, grind, drill, bend, and fabricate metal parts using workshop equipment.
• Perform basic welding (MIG, TIG, spot welding, or ARC where trained and authorised).
• Straighten damaged vehicle frames, panels, and structural components using approved repair methods.
• Fit replacement panels, brackets, and fabricated components.
• Prepare metal surfaces for welding, painting, and finishing.
• Operate workshop tools and machinery safely and efficiently.
• Assist in dismantling and reassembling vehicle body components.
• Maintain a clean, organised, and safe work area.
• Identify damaged components and report additional repairs required.
• Ensure repairs comply with quality standards, manufacturer specifications, and customer requirements.
• Follow all health, safety, and environmental procedures.
• Support workshop productivity by completing allocated work within agreed turnaround times.

Requirements:

• Grade 12
• Clean criminal record
• 2 - 3 Years experience as a semiskilled Boilermaker within the Panel beating industry
• Good communication skills
• Available immediately
• Rate :R70 - R85 Per Hour

go to method of application »

• To ensure efficient , accurate and safe setup and operation of filing lines, labeling machines and other equipment in accordance with production schedules, quality standards and safety requirements while maintaining machine performance and minimizing downtime.

Location: JHB - Eastern Suburbs
Type: Permanent
Department: Operation
Duties and Responsibilities:

• Set up production lines and machinery according to production schedules and product specifications.
• Change over tooling, dies, moulds, or machine settings for different production runs.
• Perform machine start-up, testing, and calibration before production begins.
• Monitor machine performance and make adjustments to maintain product quality.
• Troubleshoot equipment issues and perform minor repairs where applicable.
• Liaise with maintenance technicians for major equipment breakdowns.
• Ensure production targets, quality standards, and efficiency goals are achieved.
• Complete production and machine setup documentation accurately.
• Conduct routine inspections to identify wear, defects, or maintenance requirements.
• Maintain housekeeping standards in accordance with 5S principles.
• Ensure compliance with health, safety, environmental, and quality policies.
• Assist with continuous improvement initiatives to reduce waste and improve productivity.
• Train and support machine operators on correct machine operation where required.
• Liaise daily with the Production Team Leader production delays /Supervisor to confirm upcoming batches and production priorities
• Prepare in advance for the next scheduled batch change over
• Verify availability of all required components, packaging materials , labels, caps and raw material prior to setup
• Coordinate with stores and maintenance to prevent productions delays
• Ensure correct documentation ,batch , sheet and specifications are available before setup
• Perform mere setup
• Correct fill volume
• Require run rate (Speed)
• Correct change parts and tooling
• Ensure accurate line changeovers to minimize efficiency targets
• Perform mechanical adjustment to ensure proper alignment and functionality
• Conduct and record initial test runs
• No contamination or cross -mixing
• Product integrity

Requirements:

• Grade 12 or equivalent.
• 3-4 years working as a Line Setter within the manufacturing industry.
• Good communication skills.
• Matric certificate.

go to method of application »

Duties and Responsibilities:

• Drive vehicles to designated destinations for customer product deliveries
• Ensure accurate and timely deliveries of goods
• Adhere to safety regulations and transportation laws
• Inspect vehicles for mechanical items and safety issues
• Report on activities and any incidents

Requirements:

• Clean criminal record
• Minimum 3 years' driving experience
• 2 contactable references
• Valid C1 / Code 10 licence
• Valid DGP (where applicable)
• x2 Landline Contactable References

go to method of application »

Purpose of the Role

• To ensure that all hair colour products and packaging components meet company, customer, regulatory, and quality standards throughout the packing process. The Quality Checker is responsible for conducting in-process quality inspections, verifying packaging and coding information, monitoring compliance with GMP requirements, identifying non-conformances, and ensuring accurate quality records are maintained.

Key Responsibilities

• Conduct routine in-process quality inspections on packed products throughout production.
• Verify that the correct product, packaging materials, labels, leaflets, cartons, and shippers are being used.
• Inspect product appearance, packaging integrity, print quality, coding accuracy, and overall presentation.
• Ensure all products comply with approved specifications and quality standards.
• Perform line start-up checks before production begins.
• Conduct hourly quality checks and record inspection results as required.
• Verify batch numbers, manufacturing dates, expiry dates, and product codes for accuracy.
• Monitor product weight, count, and packaging configuration where applicable.

Minimum Qualifications

• Grade 12 / National Senior Certificate.
• Quality-related training or certification will be advantageous.
• Basic computer literacy.

Knowledge and Skills

• Understanding of quality control principles and inspection techniques.
• Knowledge of Good Manufacturing Practices (GMP).
• Knowledge of packaging quality standards and defect identification.
• Strong attention to detail and accuracy.
• Ability to complete documentation accurately.
• Good communication and interpersonal skills.
• Basic numerical and analytical skills.
• Ability to work independently and make objective decisions.
• 2 -3 years experience as as Quality Checker
• Good communication skills 
• Clean criminal record