Careers at Fluor Corporation

Job Description

The purpose of this position is to use established practices and guidelines applying educational knowledge of design engineering principles as listed. This role has the responsibility to promote Fluor’s competitiveness within the global marketplace by delivering quality services of unmatched value and technical competence. This position supports the Area Lead or Lead on assigned projects or performs work on routine scope engineering assignments and performs specific and limited portions of engineering assignments.

• Perform and check routine calculations, specify simple equipment, and solve problems of simple engineering complexity
• Review vendor equipment documentation within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution
• Participate in equipment and material procurement activities
• Adhere to industry codes and standards as well as department practices and procedures
• Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines
• Organize and prioritize a variety of projects and multiple tasks in an effective and timely manner, set priorities, and meet deadlines
• Other duties as assigned

Notice to Candidates:

• Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependant) education, professional registration, employment, references, passport verifications and Global Watchlist screening.

To be Considered Candidates:

• Must be authorized to work in the country where the position is located.

Basic Job Requirements

• Accredited four (4) year degree or global equivalent in engineering field of study and no required previous years of work-related experience (new graduate); a recognized professional certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements
• Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors
• Job related technical knowledge necessary to complete the job
• Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines
• Ability to attend to detail and work in a time-conscious and time-effective manner

Preferred Qualifications

• Engineer-in-Training achievement status accomplished
• Advanced knowledge of discipline codes and standards, commercial availability and cost of materials
• Practical field experience
• Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet and electronic presentation programs

go to method of application »

Job Description

Scope:

The purpose of this position is to provide the essential administrative processes, technical knowledge, and direction as listed. This role has the responsibility to promote Fluor’s competitiveness by delivering quality services of unmatched value and technical competence.
This position serves as an Area Lead or Lead on assigned projects or performs complex to difficult engineering assignments, evaluates, selects, and applies advanced engineering techniques to broad set of complex assignments.

Principal Job Duties & Responsibilities:

• Translate global strategic initiatives intprocedures tbe implemented on projects
• Apply cost competitive execution techniques tdevelop the most cost-effective total project solution for execution of the discipline engineering work
• Develop and review project Scope of Services, Scope of Facilities, and other project baseline documents for all phases of projects
• Develop and review estimates and schedules, progress reports, including manpower forecasts
• Establish, track, and monitor material key quantities; provide analysis and forecasts
• Develop and review specifications, including design criteria
• Incorporate health, safety, and environmental factors in design
• Develop and update job execution plans
• Develop and build external relations with client representatives, vendors, and subcontractors and interface closely with other discipline functions promoting Client Service Excellence
• Participate in activities associated with equipment and material procurement, permitting, and subcontracting
• Review and approve vendor lists, prepare quotation requests/bid tabulations/purchase orders and review substitutions for technical acceptability
• Assign work tteams, monitor and manage the work
• Perform and check calculations, specify equipment, and solve problems of complex tdifficult engineering complexity
• Establish and lead the squad check effort for vendor equipment documentation for assigned
• equipment
• Review vendor equipment documentation within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution
• Prepare/review scopes of work for third party contracts
• Support proposal and estimate activities
• Identify deviations in job scope, estimate magnitude of changes, and initiate trends or change orders
• Deliver quality work, and adhere tthe Operating System Requirements (OSR)
• Execute project work in accordance with approved Activity Plans
• Adhere tindustry codes and standards as well as department practices and procedures
• Contribute tand promote the use of Fluor’s knowledge management portals and communities
• Participate in Fluor University® as necessary tfollow the curricula as outlined in the Functional
• Development Frameworks
• Participate in people development through mentoring, development of training material, conducting training seminars, and performance appraisal input and counseling
• Engage Fluor’s global community, promoting a OneFluor mindset
• Monitor and support work performed by Fluor offices or other designated entities performing
• Distributed Execution Engineering
• Direct and oversee audits
• Assist in the development of department standards, procedures, practices, and guidelines
• Assist with company functions outside the department
• Support Key Process Owner and Department Manger on initiatives
• May promote company branding by active participation in external technical organizations and code committees and presents technical papers or presentations through Fluor’s P4 process
• Serve as member on an external organization or Code committee’s steering or technical board
• Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines
• Organize and prioritize a variety of projects and multiple tasks in an effective and timely manner, set priorities, and meet deadlines
• Plan and organize own work assignments, as well as carry out tasks from management staff
• Maintain compliance with all applicable policies, procedures, and global standards
• Adhere tand support Fluor's Health, Safety & Environmental and Sustainability Policies
• Effectively develop and apply the Core Skills tthe job
• May need ttravel tattend tbusiness related matters
• Meet expectations on attendance and punctuality
• Other Duties as Assigned

Discipline Specific Job Duties & Responsibilities:

• Civil/Structural/Architectural/Building Systems
• Perform calculations for foundations, concrete, and steel structures by hand and computer analysis

The Considered Candidates:

• Must be authorized twork in the country where the position is located.

Basic Job Requirements

• Accredited four (4) year degree (Civil or Structural)
• 10 Years of working experience in EPCm environment
• Professional Registration with ECSA

Advanced knowledge of:

• Hydrologic analysis and hydraulic design, geotechnical engineering and investigations, boundary and topographical surveying (civil)
• Performing hand and computer calculations for foundations, concrete, and steel structures (structural)
• Analyzing complex structures
• Wind and seismic loading in structural calculations (structural)
• Dynamic analysis and design (structural)
• Computer modeling and analysis (structural)
• Procurement and construction aspects of engineering
• Vendor drawing review, intergroup review – squad checking
• Engineering and fabricator drawing checking
• Managing and leading a small project

Intermediate knowledge of:

• Blast design (structural)
• Managing and leading a medium/large project

Other Job Requirements

• Degree Civil Engineering
• Extensive underground and surface mining study/execution project experience
• Strong people management and technical skills

go to method of application »

Job Description

Scope:
The purpose of this position is to provide the essential administrative processes, technical knowledge, and direction as listed. This role has the responsibility to promote Fluor’s competitiveness by delivering quality services of unmatched value and technical competence.
This position serves as an Area Lead or Lead on assigned projects or performs complex to difficult engineering assignments, evaluates, selects, and applies advanced engineering techniques to a broad set of complex assignments.

Principal Job Duties & Responsibilities:

• Translate global strategic initiatives into procedures to be implemented on projects
• Apply cost competitive execution techniques to develop the most cost-effective total project solution for execution of the discipline engineering work
• Develop and review project Scope of Services, Scope of Facilities, and other project baseline documents for all phases of projects
• Develop and review estimates and schedules, progress reports, including manpower forecasts
• Establish, track, and monitor material key quantities; provide analysis and forecasts
• Develop and review specifications, including design criteria
• Incorporate health, safety, and environmental factors in design
• Develop and update job execution plans
• Develop and build external relations with client representatives, vendors, and subcontractors and interface closely with other discipline functions promoting Client Service Excellence
• Participate in activities associated with equipment and material procurement, permitting, and subcontracting
• Review and approve vendor lists, prepare quotation requests/bid tabulations/purchase orders and review substitutions for technical acceptability
• Assign work to teams, monitor and manage the work
• Perform and check calculations, specify equipment, and solve problems of complex to difficult engineering complexity
• Establish and lead the squad check effort for vendor equipment documentation for assigned equipment
• Review vendor equipment documentation within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution
• Prepare/review scopes of work for third party contracts
• Support proposal and estimate activities
• Identify deviations in job scope, estimate magnitude of changes, and initiate trends or change orders
• Deliver quality work, and adhere to the Operating System Requirements (OSR)
• Execute project work in accordance with approved Activity Plans
• Adhere to industry codes and standards as well as department practices and procedures
• Contribute to and promote the use of Fluor’s knowledge management portals and communities
• Participate in Fluor University® as necessary to follow the curricula as outlined in the Functional
• Development Frameworks
• Participate in people development through mentoring, development of training material, conducting training seminars, and performance appraisal input and counseling
• Engage Fluor’s global community, promoting a OneFluor mindset
• Monitor and support work performed by Fluor offices or other designated entities performing
• Distributed Execution Engineering
• Direct and oversee audits
• Assist in the development of department standards, procedures, practices, and guidelines
• Assist with company functions outside the department
• Support Key Process Owner and Department Manger on initiatives
• May promote company branding by active participation in external technical organizations and code committees and presents technical papers or presentations through Fluor’s P4 process
• Serve as member on an external organization or Code committee’s steering or technical board
• Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines
• Organize and prioritize a variety of projects and multiple tasks in an effective and timely manner, set priorities, and meet deadlines
• Plan and organize own work assignments, as well as carry out tasks from management staff
• Maintain compliance with all applicable policies, procedures, and global standards
• Adhere to and support Fluor's Health, Safety & Environmental and Sustainability Policies
• Effectively develop and apply the Core Skills to the job
• May need to travel to attend to business related matters
• Meet expectations on attendance and punctuality
• Other Duties as Assigned

Discipline Specific Job Duties & Responsibilities:
Mechanical

• Establish equipment requirements and prepare equipment data sheets for mechanical equipment including unfired and fired heat transfer equipment, packaged equipment, pressure vessels, pumps and compressors, or packaged equipment
• Evaluate dimensions, equipment connections, and equipment performance including pressure profiles, heat transfer rates, and off-design cases
• Provide equipment sizing and application support to project development or process
• Participate in material selection for equipment
• Develop and revise equipment lists, narrative specifications, equipment standards, equipment general arrangement and outline drawings
• Participate in supplier/contractor bid clarification, negotiation, and/or award meetings
• Review and comment on supplier/contractor drawings and data
• Represent Mechanical in model reviews and closely monitor
• Provide consultation during fabrication and witness testing of equipment
• Provide consultation and/or on-site assistance for the installation, commissioning, and/or start up of equipment

To be Considered Candidates:

• Must be authorized to work in the country where the position is located.

Basic Job Requirements

• Accredited four (4) year degree (Mechanical)
• Minimum 10 years’ experience in the design, fabrication, construction, and commissioning of bulk materials handling equipment.
• Professional Registration with ECSA
• Minimum 4 years’ experience as a Lead Engineer/Project Engineer on a bulk material handling facility in an EPCm mining environment.
• Understanding of the operation of typical mining equipment such as Jaw Crushers, HPGR’s, Scrubbers, Vibrating screens, Pumped and Gravity Separation, Slurry Pumping and Stacker/Reclaimers
• EPC/m Project Execution
• Plant Layout Optimization and Review
• Bin, Chute & Transfer point design

Other Job Requirements

• Degree Mechanical Engineering
• GCC Mines & Works
• Extensive underground and surface mining study/execution project experience
• Conveyor Design (Sidewinder)
• Conveyor Audits
• Discrete Element Modelling (Newton/Other)
• Layout of Materials Handling Systems
• Layout of storage facilities such as stockpiles and silo’s
• Installation & Commissioning of BMH System.
• Strong people management and technical skills

go to method of application »

Principle Job Duties & Responsibilities

• Develop a complete understanding of the Fluor prime contract and relevant subcontracts
• Ensure Health, Safety and Environment (HSE) is emphasized throughout all phases of the project
• Collaborate in the preparation of the project in accordance with the Fluor contractual obligations, Fluor’s Operating System Requirements (OSR) and the relevant Operating System Implementation Plan (OSIP)
• Verify with the Project Director (PD) that project requirements for Baseline Centric Execution, safety, quality, cost, and productivity are met in all locations managed by Fluor where work is being performed
• Draft for the Project Director (PD) approval the project baseline (as defined in the OSR) and verify that it is fully documented, updated, and communicated to the project team as appropriate , and match to Fluor contract scope of work and responsibilities
• Support the PD to deliver the project in accordance with the project execution and commercial baselines
• Collaborate with the PD to meet the as-sold profitability target established in the project commercial baseline
• Prepare for the PD approval a draft for the contract summary and communicate it to the project team
• Lead the preparation of a written scope of facilities and services, and communicate it to project
• Collaborate with the PD in the establishment and definition of the project organization, defining the project staffing requirements coordinating staffing with supporting organization managers
• Lead the efforts of establishing, communicating, implementing, and maintaining the Project Execution Plan (PEP) and Project Procedures Manual (PPM)
• Demonstrate strong, effective, and decisive project leadership and establish an execution framework to ensure the safety, quality, value, timeliness, and profitability of the total project execution (engineering, procurement and construction/construction management (EPC/EPCM), commissioning, start up, and operations as appropriate to the Fluor project scope)
• Establish and maintain effective client relations that result in active cooperation, prompt payment, and stimulate the desire to award follow-on work
• Provide support to the PD with the development of the project distributed execution plan, maximizing workshare opportunities where beneficial to the project outcome
• Under the direction of the PD, implement and maintain operationally consistent work processes that enable worksharing to be effectively executed among multiple offices and construction sites
• Participate in the accurate, comprehensive and timely project reporting, including completion of the final close-out report, and in project reviews
• Collaborate with Project Controls in the establishment, maintenance, and management of a fully documented change control system that tracks all changes to the contract and project baseline requirements or conditions
• Support the establishment of an efficient and cost-effective project environment
• Participate in the management and control the project’s cost and schedule by ensuring that effective project controls are in place and functioning properly, including establishment of a project structure (work breakdown structure/network/network activity), a quantitative approach to planning, reporting, and control, and a change management system
• Under the direction of the Project Director (PD), lead the establishment and update the Fluor Business Risk Management Framework (BRMF) throughout the project life-cycle, perform initial and quarterly project BRMF assessments and ensure the coordination of the project BRMF results with Fluor financial reporting; lead the development of mitigation strategies
• Execute the work in accordance with the quality standards and requirements specified for the project, including the preparation of and compliance with project-specific activity plans and ensuring project audits/assessments are conducted per plan
• Ensure effective and timely coordination between design, procurement, material management, and construction teams for integration of technical content and schedule requirements
• Ensure timely preparation and issuance of project deliverables, design documents, and bid packages in correct quality and according to project schedule to support project execution activities
• Lead the implementation of an effective design coordination with licensors, vendors, and subcontractors to ensure proper and complete integration within the project plans
• Ensure effective interface management with third parties
• Support the implementation of automated work processes and tools on the project to the fullest extent practical, consistent with adding value
• Comply with standards and procedures regarding the security and management of computing facilities and systems, including the use of Fluor reference systems
• Support the PD by verifying that project invoices are submitted to the client in accordance with contract requirements and proactively follows up on accounts receivable and the timely receipt of payment in order to minimize the cost of cash
• Keep supervisor and senior operations management fully informed on project status, including client relations, project cost and schedule, changes in risk assessment, anticipated changes in project financial performance, and any other major concerns
• Ensure that project records are identified, collected, indexed, filed, stored, and maintained (including supplier records) in accordance with the project file index and retention schedule
• Review, organize, and share relevant lessons learned from other projects and seek advice from other experienced managers as necessary throughout the life of the project
• Collaborate within sales, operations and technical teams pursuing prospective projects to develop win strategies including project execution and commercial strategies

To be Considered Candidates:

• Must be authorized to work in the country where the position is located.

Basic Job Requirements

• Accredited four (4) year degree or global equivalent in engineering field of study and sixteen (16) years of work-related experience, a recognized professional certification or registration in the applicable field,
• Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and other stakeholders
• Job related technical knowledge necessary to complete the job
• Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines
• Ability to attend to detail and work in a time-conscious and time-effective manner

Preferred Qualifications

• Relevant experience managing Underground Projects from studies into execution.
• Manage and control various project team members as well as any subconsultants
• Degree
• GCC Mines & Works
• Extensive underground and surface mining study/execution project experience
• UG Mining experience (Head Gears, Ventilation, Shafts)
• Experience in the following commodities:
• Copper
• Iron Ore Beneficiation
• PGM
• Experience in the following unit processes will be beneficial:
• Crushing and Milling
• Flotation
• Thickening
• Filtration
• Materials Handling
• Fine Grinding
• Strong people management and technical skills
• Certification in project management suggested, for example, Project Management Professional (PMP)